Frequently asked questions.

Both, conventional and bioenergetic medicine define health as a state of well-being, with all body systems working in balance (“Homeostasis”). Conventional medicine classifies disease by its perceived material cause and acts to suppress the cause and the symptoms. For example, sinusitis is believed to be caused by either a viral or bacterial infection traveling from the nose as a typical complication of a common cold. When you are sick with sinusitis, you go to the doctor for your diagnosis and prescription drugs such as antibiotics, decongestants, and antihistamines. You usually feel better after a time and consider yourself cured. However, the drugs have side effects, potential contraindications and toxification, while the sinusitis often returns with the next cold as the actually root cause has not been addressed.

The bioenergetic approach considers disease as distortions in the human body-field that correlate to the symptoms of illness. The latest research shows our body-field regulates energy and information at a sub-cellular (quantum) level, acting as the master control system regulating our body’s physiology. It is the “information-software” that directs the organism’s “energy-hardware”. Our body and its body-field are interdependent, each arising from the other and interacting with one another. Distortions in the body-field, if left uncorrected, correlate to the symptoms of illness.

Consequently, bioenergetic practitioners do not focus on a specific illness or disease label, but focus instead on correcting the body-field by clearing blockages and distortions that correlate to physical and emotional stress and trauma, as well as environmental and chemical toxins, thereby restoring the body's inherent healing qualities in a natural and safe way, frequently far beyond what we typically experience with our chronically compromised bodies.

Our bioenergetic healing approach is designed to read, communicate with, and stimulate a change in the human body-field (body's “information software”), which regulates the energy and information fields of the body (“energy-hardware”), by clearing blockages and distortions that correlate to physical and emotional stress and trauma, as well as environmental and chemical toxins, thereby restoring the body's inherent healing qualities in a natural and safe way.

To fully understand where quantum physics and healing intersect to create a “quantum healing experience” by promoting a bioenergetic approach, let’s first take a quick look at what information medicine is.

NES Health has pioneered this field of ‘information medicine’ and developed the only system currently available that is based on over thirty (30) years of research mapping the human body-field and its ‘optimal states information’. This revolutionary system incorporates biology, Traditional Chinese Medicine, quantum physics, and technology. The principle is that with a perfectly operating body-field, the body knows precisely what to do and can repair itself. Essentially, the body is able to work off of a blueprint or set of information codes for optimal energy, health and homeostasis.

Our body-field transmits information to our cells’ own energy fields about what biochemical functions to perform and in what order - it is the “information-software” that directs our organism’s “energy-hardware”. When this energy is blocked or out of balance, the information is also blocked or gets distorted, and our body ceases to function the way it should. This leads to malfunctioning and eventually to illness and disease.

Information medicine focuses on accurately assessing your body-field and tuning it to engage your body’s self-healing ability so that your body can more easily return to optimum function and health in the most natural and safe way.

Scalar waves play an important role in this with their ability to carry out lossless transmission of energy and that they do not decay over time or distance. Also, scalar waves are able to transmit information.

Cells use scalar fields to communicate. Blockages disrupt this natural communication. Scalar fields introduce energy, which helps restore this communication, exposing the diseased cells to the body’s defenses.

Mitochondria is the “power station” of cells. Scalar fields charge the mitochondria, giving your cells much-needed energy to open and remove the blockages. Once the blockages are removed, your body will restore the flow of energy back to a healthy state.

Our bioenergetic therapy has 4 fundamental elements:

1. (Re)Assess the body's health with a body-field scan for a detailed analysis addressing the three critical factors for health in the body — namely, its information, energy, and physiology. The scan uses a proprietary process (space resonance matching methodology) developed by NES Health and is based on the research from Physicist Milo Wolff's Space Resonance Theory. It essentially sends the bio(quantum)-information from NES’ body-field mapping (via NES Mobile scanner or NES miHealth device) into the body-field and then reads it's response covering well over 200 individual assessments of the body-field. The entire scan is non-invasive and merely takes a few seconds. (For a deeper understanding of how the response is measured, here is an article on bioenergetic health screening). Our practitioner then uses the scan result with the support of NES’ intelligent software to design a personalized therapy recommendation that is comprised of the other 3 elements below.
2. Rejuvenate the body’s energy utilizing the powerful NES miHealth device to clear blockages, release trigger points, and correct energy flow through the body.
3. Re-Imprint the body's information to correct information distortions and restore optimal functioning with a range of liquid bioenergetic remedies, called NES Infoceuticals, that are imprinted with proprietary bio(quantum)-information.
4. Realign with our BioScalar Infusion approach using a scalar wave/energy field to transmit simultaneously the corrective holographic information of NES Infoceuticals, NES miHealth global scaling frequencies & information, Rife frequencies, PEMF, imprinted music and information of other molecular substances (e.g. nutritional supplements specific to your blood type, toxin binders etc.) into your body-field. Essentially transferring a wealth of corrective and supportive “information” together with the benefits of scalar waves/energy into your body to help restore and optimize its functionality.

In combination with other complementary therapy elements including nutritional & detox support, dietary & life-style changes, and stress management, this leads to a faster and optimized body-field "correction" without side effects. Our unique approach has been extremely successful in helping thousands of people worldwide resolve their health and wellness issues from conditions conventional medicine and other modalities could not treat.

Information Medicine is just getting started!

The NES Mobile scanner device looks like a computer mouse and is connected either via its supplied USB cable with a computer’s USB port or via Bluetooth with a smartphone (Android/iPhone) and is used together with the respective NES application software to perform a body-field scan. The scan uses a proprietary process (space resonance matching methodology) developed by NES Health and is based on the research from Physicist Milo Wolff's Space Resonance Theory. It essentially sends the bio(quantum)-information from NES’ body-field mapping into the body-field and then reads its response covering over two hundred (200) individual assessments of the body-field. The entire scan is non-invasive and completed in a few seconds. We use the device for Telehealth (remote) sessions as well as in our clinic.

The NES miHealth is a powerful hand-held biofeedback device that is non-invasive and effective for rejuvenating the body's energy and restoring proper energy flow throughout the body. It clears blockages, releases trigger points, and reduces stress in muscles, nerves, organs, and other areas of the body. As stress is released, energy can flow properly, and the body's own innate intelligence starts to heal itself.

It employs several unique technologies — pulsed electromagnetic field (PEMF) therapy, global scaling frequencies (based on natural oscillations inside the body-field), and encoded onto the carrier wave NES' proprietary bio(quantum)-information from the mapping of the human body-field.

NES conducted a large outcome study for the NES miHealth that included two hundred fifty-one (251) subjects, and which collected data across three hundred sixty-seven (367) data points. In the study, eighty eight percent (88%) of the participants benefited from the miHealth therapy after the initial consultation. Additionally, the positive effect on general rejuvenation was compounded on the second and third therapy sessions so that the subjects saw an increasing trend to wellness. You can explore the results from the NES miHealth outcome study here.

Vibroacoustic therapy (VAT) is a science-based therapy that uses mild sound and gentle vibrations to reduce stress, relieve pain, restore balance and enhance the quality of life. VAT frequencies range between 30Hz and 120Hz and are applied directly to the body through special speakers called transducers. The transducers can be embedded within some sort of furniture such as portable mats, mattresses, massage tables, custom tables with water bladders, beds and recliners.

As a person’s body has contact with the embedded speakers, the music is sent from the source into the transducers and is then felt by the body as vibration and heard by the ears as sound. The vibro-tactile input stimulates nerve bundles along the spine, up into the brain stem and then through the limbic system. In addition, the sound stimulates the medulla in the brain stem and activates the auditory nerve that connects with all the muscles of the body.

These reactions signal the body to relax and flood the brain with mood lifting chemicals. In addition, the low frequencies also cause a relaxation of the tissues, and a dilation of blood vessels and an opening of the lymphatic pathways which in turn increases the body’s ability to heal.

Vibroacoustic therapy (VAT) has been studied by researchers worldwide including the National Institutes of Health (NIH). NIH reports the benefits of using VAT for Parkinson’s, PTSD, anxiety, physical injuries, brain function, COPD, asthma and much more.

Our RestStation's major benefit is the calming effect the system has on clients and thereby assisting them with the relief from anxiety disorders, depression, PTSD, autism and learning difficulties, dementia, stress, pain, insomnia, and more. The client is brought into a meditative state, which usually takes about ten (10) - fifteen (15) minutes, and the binaural beats and healing frequencies trigger the body’s natural relaxation response.

When vibroacoustic therapy is used in conjunction with other vibrational/energy healing modalities, such as our bioenergetic therapy based on NES' Infoceuticals, miHealth biofeedback, PEMF, Rife frequencies and BioScalar Infusion therapy, this creates what Don Estes calls “Sensory Resonance”, where the individual is bathed in harmonic frequencies that integrate the whole brain and body into a state of peace and calm. When the mind and body are in a calm state, all kinds of health benefits can occur.

Vibroacoustic therapy (VAT) has an immediate and pleasurable effect, but some effects can appear several hours, often days, after the therapy session.

Repeated therapy sessions will increase the cumulative effect of the therapy series. Research shows best results occur with cumulative sessions for between 10 - 12 weeks. We recommend a minimum treatment schedule of 8 weeks for the majority of cases, either once (1) or twice (2) per week. More chronic conditions require two (2) - three (3) times per week.

Clients remove only their shoes and recline on our RestStation lounge chair. Then they put on the provided stereo headphones and sleep mask (optional). Once we make sure you are comfortable, the practitioner chooses the music protocol to address the issues indicated, turns on the equipment and makes sure the headphone volume levels are comfortable for you.

You will begin to feel the gentle vibrational frequencies through the RestStation's special speaker system, called transducers, and hear the soothing music as well as any guided meditation (as applicable) through the headphones.

If you are scheduled for a vibroacoustic therapy (VAT) session without combining another service, your practitioner then leaves you in the room to enjoy your session for the scheduled time. It usually takes about ten (10) to fifteen (15) minutes for the relaxation response to begin in the body and clients report feeling many pleasant sensations. Abstract thinking slows and body and mind awareness expands. Some people experience a dream-like, or deep meditative state. Others fall asleep, report seeing colors, experience clarity and new insight and feel relief of pain or symptoms. If your protocol includes a guided meditation, then they create a completely relaxed state of mind before powerful and positive affirmations are delivered utilizing a unique echo effect. It's this unique combination that helps clients overcome deep rooted, negative patterns of thoughts and behavior.

If your appointment combines vibroacoustic therapy (VAT) with another service like a Total Wellness Session, your practitioner will guide you through the process of all therapy elements in conjunction with your VAT.

When the session is over, the practitioner will return to the room to gently turn down the vibrational frequencies and music.

The impact of your session is usually long lasting. Many clients report feeling the impact for between two (2) and four (4) days after therapy. Your body will experience deep relaxation similar to a full night’s sleep, which promotes less stress during the day and sounder sleep at night.

More than 40,000 hours of therapy have been provided to patients in Europe and USA. There is not a single report of risk or mishap. No significant adverse effects have also been found. However, some patients may experience nausea during the first couple of sessions.

However, as precaution for our clients we do not perform vibroacoustic therapy (VAT) under the following circumstances:

• Individuals with pacemakers
• Individuals with very low blood pressure
• Individuals with a DVT, bleeding disorder, or recent surgery
• Individuals who have had a recent psychotic episode (active or borderline psychosis)
• Individuals with open wounds, external or internal bleeding (except menstrual)
• Individuals who have had a recent thrombosis
• Women who are pregnant (not because side-effects have been experienced, but because we are cautious!)

If any of these conditions apply to you, please let us know before you schedule an appointment or therapy begins.

Blood tests and urine tests obviously provide important information about a person's biochemical status, but they only evaluate the fluids in the body. However, the vast majority of biochemical functions actually take place inside the cells themselves. Of course, we can't conveniently take snips out of the various organs of a person's body in order to evaluate what is going on in the cells, but there are cells conveniently available to us, the cells of the hair.

Through extensive research and correlation of data, it has been established that there are reliable relationships between the levels of minerals in the hair and other tissues of the body. Thus, analysis of the mineral content of an individual's hair can provide us with a general 'blueprint' of the mineral content in the rest of the body's tissues. Since these minerals are crucial to the functioning of enzymes, hormones and other biochemical systems which sustain life, it is possible to read this 'blueprint' and see where metabolic patterns are deviating from normal.

Another benefit of hair analysis is that it may be used to pinpoint the development of metabolic dysfunctions often before symptoms manifest. While mineral imbalances in the body do eventually show up in the blood serum, they will not do so until the condition is so advanced that the individual is often experiencing overt symptoms. Tissue mineral analysis allows us to determine that an imbalance exists, before the imbalance begins to manifest disturbances on a symptomatic level. Therefore, the imbalance can often be corrected through nutritional therapy even before a person begins to suffer from metabolic symptoms.

Our hair analysis is performed in a laboratory using the most advanced and sophisticated technology for mineral analysis in the hair. You collect your hair sample in the convenience of your home, or, we can do this for you in our clinic.

You will have enough hair when the 1.5-inch (or shorter) cut hair samples will fill an ordinary tablespoon. However, your hair analysis kit includes a “hair scale” so you can make certain you are submitting the proper amount of hair sample. For more details, see How to Cut a Hair Sample for Analysis. Be sure to use the hair that was right against the scalp.

Collecting your hair sample is simple. Your kit includes a “hair scale” to ensure you collect the right amount.

You will collect your hair sample from the top and back of the head (draw an imaginary line across your head from the top of the ears to the nape of the neck). This provides a wide area to collect samples.

Using stainless steel scissors merely cut 10 to 15 strands of hair at each location. Use multiple locations until your hair scale tips.

Cut the hair as close to the scalp as possible. Keep the 1.5-inch (or shorter) of the sample closest to the scalp and discard the rest. Place each sample on the hair scale until the scale tips.

Once the scale tips, indicating a sufficient weight of hair, simply place the hair sample into the provided hair sample collection envelope and then place that envelop together with the completed Hair Submission Form into the prepaid return mailing envelop you received from us. For more details, see How to Cut a Hair Sample for Analysis.

Do not pull your hair by the roots!

Yes. You can either cut your own hair sample, have a friend or hairdresser cut it, or you can come to our clinic, and we can cut the sample for you. If you are cutting your own sample, it may be easiest to take it from the sides so that you can see in a mirror where you are cutting. Whether you or someone else cuts your sample be sure to follow the How To Cut A Hair Sample For Analysis instructions carefully. To make an appointment for us to cut your hair sample, call 1 (866) 688-3760, or email appointments@juneva.com.

Make sure your hair has been washed, preferably with a mild soap or with shampoo, at least 4 hours (but no longer than 24 hours) before cutting the sample. So, you would wash your hair and wait 4 to 24 hours before sampling it. Avoid using conditioners or rinses for best results. Do not place other products on your hair such as hair cream, hair spray, gel or others until after you have cut the hair sample. Avoid any activity that will cause you to sweat excessively before cutting your hair sample. Hair needs to be dry when sampling, so avoid putting wet hair in hats or other covers, ponytails or any other style that will prevent the hair from drying by the time the sample is taken.

IF YOU HAVE A WATER SOFTENER: It is very important that you wash your hair twice with spring water or regular, unsoftened tap water before cutting your hair sample. This does not have to be twice in the same day but needs to be two times in a row. Do not allow the softened water to get on your hair between, during or after the two washings. Once you have cut the hair sample, you may return to using your regular softened water. We have you do this because softened water contains sodium and sometimes potassium which will alter the analysis readings of those minerals.

The hair sample should not be longer than 1.5 inches and can be as short as 1/8th inch if the person has buzzed hair, for example. The longer the sample length, the further back in time we are analyzing. Ideally, we want the more recent information. For a first hair analysis, 1 to 1 1/2 inches is fine (we find a ruler is helpful — some people accidentally send us hair samples 3 inches or even longer). For a repeat (progress) hair mineral analysis, you may want to use only an inch or less of hair that is closest to the scalp so that we have the most recent information and can see the more recent changes.

A hair sample will last months after it is cut as long as it is stored in a clean paper envelope. So, you may cut a sample and then send it to us a month or two later. Ideally, you want to use a sample that has been cut more recently so that the information is more current, but an older hair sample may be used if needed. Some people will have to grow and cut their hair multiple times to get enough hair for the test (such as babies with sparse hair, or those who keep their hair buzzed very short). In such cases, the hair can be collected over multiple trimmings and saved in a paper envelope to be sent in when there is enough.

Yes, as long as it is the hair closest to the scalp. When cutting a hair sample for a repeat (progress) hair mineral analysis, we recommend you try to take hair from the same general location as the initial analysis, as this gives more reliable comparisons.

When using hair for a nutritional/toxic element analysis, we prefer scalp hair because it provides the most accurate metabolic record. Scalp hair is one of the most metabolically active tissues and grows at a more consistent rate than axillary hair (underarm), pubic hair, or other body hair.

In situations where there is insufficient scalp hair you can use axillary hair, pubic hair, or other body hair. Note, however, that samples from the scalp and different parts of the body should not be mixed together.

Most hair tints, dyes, rinses and highlights are chemical-based. The hair analysis deals with mineral content, so hair dyes usually don’t affect it. Bleaching the hair can affect it a little, so it’s best to wait until you have washed your hair 6-8 times after bleaching the hair before taking the sample. It is also best to have washed the hair a few times after dying it before sampling. But overall, it doesn’t make much of a difference. However, medicated shampoos of concern are Selsun Blue (selenium) and Head and Shoulders (zinc). Ideally, for repeat hair mineral analyses, it is nice if you can cut the sample just prior to bleaching or dying. Grecian formula does contain lead which will appear on the hair analysis. Grecian formula is best avoided in general due to this toxicity.

Mineral levels and ratios as determined by Analytical Research Labs for each individual are measured against an 'ideal' standard of health, rather than an 'average' standard as used by other laboratories. This renders their results more sensitive and meaningful to those people who aspire to optimum levels of health.

The lab works with precise mineral levels and ratios rather than with the broad ranges employed by the majority of professionals engaged in hair analysis. As a result, we identify even slight deviations from 'ideal' values responsible for some disorders which would escape detection by other labs.

Their tests recognize biochemical individuality through determination of three basic oxidation types, thus providing a sound basis for an accurate and specific selection of nutrients based on the individual's metabolism. Detrimental health effects arising from mismatching of nutrients with individual metabolism are therefore avoided.

No, Juneva Health is not the laboratory. We, like other qualified professionals, provide laboratory services for labs that do not sell directly to the public. Accutrace Laboratories, Inc. is a wholly owned subsidiary of Analytical Research Laboratories, Inc. and is their federally licensed laboratory that performs the actual mineral assay of the hair samples. Accutrace Laboratories operates a CLIA certified laboratory. Your test will be performed in their lab inspected by the Department of Health & Human Services.

Our laboratory is one of the only two laboratories we know that DO NOT wash the hair. Numerous studies have revealed the potential for removing exogenous minerals from the hair during pre-analysis preparation of the hair sample. This in turn will skew the results and basically render the results of the analysis inaccurate.

Water softeners are devices used to remove “hard” minerals (usually calcium and magnesium) from the tap water. They can be hooked up to the whole house or building or just select rooms or even individual faucets, like in a bathroom. (There are filters that work to simply remove chlorine from the water; these are not water softeners.) Some water softeners work by adding an electrical charge to the water, which has no effect on the hair analysis test. Others work by adding either sodium or potassium to the water, which then raises these levels in the hair and alters the hair analysis test readings.

If you have to periodically add sodium or some other compound to a device on your water supply, then you likely have one of these softeners and need to follow the water-softener instructions for preparing your hair for sampling. You may live in a building where this is handled for you, so you may not know if you have a water-softener. One way you can tell if the water you are using has been softened is that it will have an almost slimy feel on your skin. Additionally, softened water doesn’t leave water stains or mineral deposits on dishes and surfaces. One more clue is that soft water allows soap to foam up very easily. Usually, one knows if they have a water softener, but if you aren’t sure, and you want to play it safe, just follow the water-softener directions in the How to Cut a Hair Sample for Analysis instructions.

Foods, more specifically Healthy Foods, are your primary sources of nutrition. As such, by following the food recommendations included in your comprehensive analysis you can begin to shift your nutritional biochemistry. However, there may be times you need more of specific nutrients than foods alone can provide. This would be an instance when you may want to consider adding supplements to your diet.

The topological circuit of the Aires patented microprocessor’s resonator antenna accumulates charges. A cell phone’s or other electronic device’s “electromagnetic impulse generator” serves as the source of these charges. When an excess charge (polarization) has built up, it is automatically redistributed to the Aires microprocessor, which uses the charge to cause a coherent transformation of the field in the form of a hologram – made up of regularly alternating maxima and minima. The hologram interacts with external radiation, restructures it (forward and reverse Fourier transform) and matches it with a person’s own radiation, thus eliminating conflict between the external radiation and the radiation from the human body’s cells.

Lifetune One - simply use the provided adhesive to attach it to a device surface.

Lifetune Flex/Go - carry it in close proximity to you, for example in your front pocket, in a bag, under your pillow while sleeping or affix it to a keychain, backpack, or purse. For optimal results carry it on your chest using a necklace.

Lifetune Zone/Zone Max - simply place it on a flat surface or use the provided adhesive to attach it to a vertical surface.

Multiple studies were conducted proving significant effectiveness of the product in reducing the harmful effects of electromagnetic radiation. Find out more here.

Lifetune One - the recommended coverage diameter of the effective influence of the device is ~19 feet (6m).

Lifetune Go - the recommended coverage diameter of the effective influence of the device is ~30 feet (10m).

Lifetune Flex - the recommended coverage diameter of the effective influence of the device is ~42 feet (14m).

Lifetune Zone - the recommended coverage diameter of the effective influence of the device is ~93 feet (31m).

Lifetune Zone Maxx - The recommended coverage diameter of the effective influence of the Lifetune Room is ~105 feet (35m).

True for all Lifetune devices - the closer it is to the body, the more effective it will be.

Our product doesn’t block EMR/EMF, by doing so it will block the function of the device that emits the signal. Testing the device with an EMR/EMF meter will not show you a significant reduction of the EMF because instead of blocking the field we are modifying it, not necessarily reducing its intensity. Alternatively, you could test the effectiveness of the device by measuring the change in the body’s response to an EMR emitting device with and without our product being applied to it.

This could be tested using an encephalograph and other similar devices under laboratory conditions. You can read more about verifying the effect here or watch the Aires Tech EEG Brain Scan Demo video.

The only adequate test to verify the effectiveness is to measure the human response to EMR with and without the device. The device cannot be tested at home as the testing procedure requires specialized equipment to measure the person’s physical condition after or during interaction with EMR.

You can read more about verifying the effect here or watch the Aires Tech EEG Brain Scan Demo video.

No negative effects on human health have been observed. The beneficial effect is based on reducing exposure to external electromagnetic radiation. This reduces the drain on the body caused by its fight against the effects of electromagnetic radiation. The body receives additional adaptive powers by using its own store of health. If you experience any discomfort, discontinue the use immediately.

A Printed Circuit Board with gold immersion coating and a Monocrystalline Silicon wafer chip, polymer protective layer. The Lifetune One device has also an adhesive layer.

The tested frequency range is between 2.4GHz to 28GHz (5G). For more details please see “Computer Modelling Calculations” here.

No, it does not affect the quality of communications and does not interfere with the operation of devices.

The Lifetune Room does not require any external power. It is a passive device powered by the electromagnetic field of devices around it.

The effectiveness will not deteriorate as long as the Aires microprocessor- and the device's structural integrity is maintained. Physically damaging the device or separating its original layers will impair its performance.

Lifetune One - is 19.8mm (0.78in) in diameter.

Lifetune Flex - is 35mm (1.37in) x 35mm (1.37in).

Lifetune Go - is 30mm (1.18in) x 30mm (1.18in).

Lifetune Zone - is 53mm (2.09in) x 53mm (2.09in).

Lifetune Zone Max - is 122mm (4.80in) x 65mm (2.56in).

Lifetune One - the device and instructions.

Lifetune Flex - the device and instructions.

Lifetune Go - the device, instructions and a keyring.

Lifetune Zone - the device, instructions, carrying sling and leather pouch.

Lifetune Zone Max - the device, instructions, and installation adhesive.

A one-year manufacturer warranty provided by Aires Technologies on item defects, from the date of purchase.

Yes, it is completely safe for use with children. Children should not have the device hung around their neck as the harness may pose a hazard. A newborn in a crib may have the device placed under the mattress or somewhere on the crib or on the baby monitor. We highly recommend EMR/EMF protection for children as multiple studies have shown that children are more susceptible to EMR/EMF exposure.

It has been designed to work effectively on any data transmitting devices such as cell phones, smart phones, tablets, laptops, PCs, smart TVs, WiFi routers, smart meters, and more.

For best results it should be applied in the center of the device on the front or the back panel. It can be applied anywhere on smaller devices such as cell phones, smart phones, tablets, Wi-Fi router etc.

No, you can only apply it once onto a device using the adhesive layer. It could be damaged if you try to remove it and reapply it elsewhere. The adhesive layer will lose its hold if removed.

Yes, the Lifetune One can work with a protective case. It can be applied on top or underneath it.

Your magnet will not affect the use or function of the Lifetune device.

Yes, one is enough for small devices, such as cell phones, smart phones, tablets, Wi-Fi routers, etc. It is recommended to use multiple of them for larger devices, such as smart TVs, PCs and large computer screens.

The device is splash proof, but should not be submerged.

The device is fragile, please handle with care.